Concrete Garden Bench: Attractive, Easy-to-Build Seating


A concrete yard bench adds a hardscape factor to your backyard’s lush green landscape.

This simple seating allows you stop and scent the roses — pretty much! —  and can provide as a monument to honor a family member or don’t forget a beloved pet.

Layout is all about the facts, and I adore this back garden bench for its simple, thoroughly clean lines. Here’s how to generate it.

Making a Concrete Backyard garden Bench

Chelsea Lipford Wolfe sits on a concrete garden bench.


1. Sizing Up the Concrete Backyard garden Bench

Very first, determine your garden bench’s dimensions. Continue to keep in thoughts that you are going to will need to make a single slab for the seat and two slabs for the legs.

To work out how a lot of baggage of Quikrete Concrete Blend you are going to will need, enter the bench’s dimensions into Quikrete’s Concrete Calculator

For this bench, I used five 80-pound luggage of Quikrete Concrete Combine. Below are the proportions: 

  • Bench seat: 48 inches extensive by 16-1/2 inches wide
  • Legs: 16 inches tall and 15-1/2 inches wide 

2. Develop the Kinds

Up coming, create varieties for your concrete backyard bench with pieces of melamine. 

Melamine is an excellent substance for concrete types because it is slick, releases nicely from concrete and leaves a smooth surface. 

Minimize the melamine to the proportions you want for your concrete backyard bench.

Use drywall screws to attach the sides of each and every kind to the base. Your varieties should really search like an open box — the big piece will type the seat although the two lesser pieces will variety the legs. 

Next, seal the inside of seams with caulk, slice reinforcement wire to suit into every single variety, and established the forms apart.

3. Blend the Concrete

For this sum of concrete, use a wheelbarrow and a yard hoe for mixing. Mixing in a wheelbarrow also helps make it less difficult to pour the cement into the types.

To get a deep grey end for the concrete backyard garden bench, incorporate a 10-ounce bottle of Quikrete Liquid Cement Coloration in Charcoal to the water right before mixing. 

When mixing concrete, generally use impervious gloves to safeguard your palms. 

For every 80-pound bag of Quikrete Concrete Combine, include about 6 pints of thoroughly clean water. Get the job done the combine with the yard hoe and insert h2o till it is a stiff, moldable consistency. 

Be absolutely sure there are no dry pockets of substance and do not leave standing puddles of water.

4. Pour Concrete Combine into the Kinds

Pour the concrete combine into the melamine sorts until eventually 50 %-total, and then add the reinforcement wire. 

Fill the forms and screed off the excess with a 2-by-4 piece of wooden.

Faucet the kinds on all sides to launch air bubbles from the blend. Air bubbles would make the surface area of your concrete bench glance foamy as soon as it’s dry, and nobody needs that!

Allow your concrete dry for at the very least 5 times in heat weather conditions at 70 degrees Fahrenheit or larger or seven days in colder weather at 50-70 levels Fahrenheit.

5. Get rid of the Sorts and Assemble

Unscrew the drywall screws from the melamine varieties to remove them as soon as they’re dry. 

Established the legs upright and drill a gap in the prime centre of every single leg. Then, drill two holes in the middle of the concrete seat to match the legs.

To protected the seat to the legs, hammer metal rebar pins into the leg holes and increase Quikrete State-of-the-art Polymer Building Adhesive to the surface area. This adhesive will hold the seat in position and stop wobbling.

Now, connect the seat by lining up the pins with the holes in the seat. Use a amount to make absolutely sure the bench is even.

Use a sander with 120-grit sandpaper to clean out any tough edges. 

Last but not least (and this is my beloved part) enjoy your new concrete backyard bench!

Even further Studying


Source website link